For the vast majority of us, protecting our motorcycles is a simple matter.
Set an alarm or cover it up to keep it safe.
Set it and forget it, in other words. This will make it more difficult, but not impossible, for the thief to get away. They could merely lift it into their van and go away. However, isn't it true that life is full of uncertainties?
A motorbike ground anchor might be preferable to this set-up. You can't bust that baby if it's tough enough!
There are a growing number of ground anchors being used to dissuade would-be motorbike thieves from looking for an easy ride.
Anchors can either be bolted to the ground or set in concrete to ensure maximum security. In this case, a ground anchor is your best bet either your garage floor is a concrete slab or you have a designated parking lot at work and no one mind's you digging out a square of tarmac and laying some concrete down.
If you live in California, this is especially true.)
If you can't set up a concrete anchor for some reason, you can use a wall anchor instead. Chaining your motorcycle to a lamp post is less reliable, but it's still better than doing so. It's a good way to bring your motorcycle closer to the garage storage system's tools.
Our mantra is that no security system is completely foolproof. An angle grinder capable of gnawing through practically any type of security chain or lock is an industrial-grade tool. The only problem is that they don't have the luxury of time to devote to such an endeavour.
Oxford Products LK397 Oxford Brute Force Ground Motorcycle Motorbike Bicycle Ebike Security/Wall Anchor, BlackView on Amazon
16" Spiral Tie Out Stake Ground Anchor for Dogs, Tents and Trees - 4 Pack | 4 Smart-Stake Ground Anchors for Securing Trampolines, Swings, Motorcycles, Kayaks, Picnic Tables and Outdoor FurnitureView on Amazon
- BrandDC Cargo Mall
- BrandXena Intelligent Security X
Artago 61 Security Anchor Lock, Security Ground Anchor, Anchor Motorcycle Anti Theft, Concrete Floor Anchor Bike Anti Theft Bike Security Motorcycle Security, Sold Secure Gold Approved, BlueView on Amazon
Champ Floor Anchor Pot – 1 Pot – 3-1/2 In Diameter - 3/8 In Chain Grommet Thickness - 4 In Sleeve Height - Professional - Made in USAView on Amazon
Urban Security UR55 Ground Anchor Wall Anchor, Heavy Duty Security Anchor Motorcycle Security Bike Security, Anchor Point Concrete Floor Anchor Security Ground Anchor, 14mm Shackle, BlackView on Amazon
- BrandUrban Security
URBAN UR50 Ground Anchor Wall Anchor, Heavy Duty Security Anchor Motorcycle Security Bike Security, Anchor Point Concrete Floor Anchor Security Ground Anchor, High Resistance SteelView on Amazon
RADIKAL RK54 Heavy Duty Security Ground Anchor for Floor or Wall, Bike Security Motorcycle Security with Swing Shackle, Anchor Point Security for Motorcycles, Anchors Strong Hold IncludedView on Amazon
KRASER KR804 Security Anchor Wall and Ground Anchor for Motorcycle Security, Bike Security, Concrete Floor Anchor Motorcycle Bike Anti Theft, Includes Anchors Strong Hold and Anti Drill Balls, BlackView on Amazon
- BrandAlchemy Parts
Last update on 2022-08-10 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API
The installation of a bolt-down ground anchor is straightforward, requiring only a small amount of drilling. As a rule, there are at least two anchor bolts for further security.
It's also important to note that an embedded concrete anchor requires considerable digging. You may even require a sledge hammer to break up an existing slab of concrete in order to dig a hole deep enough to conceal the internal construction. If the anchor sets, it will be impossible to remove or destroy.
A concrete-in anchor can't truly be installed in front of your business. Even so, the garage or shed is the ideal location for tinkering and drilling.
Ground or Wall?
Your own convenience and the safety of your bicycle are also reasons to consider this issue.
An exception to this rule would be if the shackle was domed such that it could be stepped on or driven over.
Putting your anchor on a wall can be a smart idea for that reason alone.
Wall anchors, on the other hand, make it even more difficult to cut a chain. When a thief had to elevate the croppers and keep them at odd angles while panting and puffing to bite through a heavy chain, they don't have enough leverage.
An earth anchor may be your best bet if your floor is made of concrete. The problem is that if it's made of gravel, it's tough to install and easy to remove from the ground. This is when a wall or pole anchor makes sense.
You’ll want to know what your anchor kit includes, and how easy it is to set up. In most circumstances, you'll need a drill and appropriate drill bits. Before you press the "order" button, be sure to check whether or not the bits are included in the bundle.
However, most of the choices we've covered in this article are pretty simple to set up.
You REALLY need a heavy duty ground anchor
Ground anchors are perhaps the most efficient preventative strategy against motorbike theft. But they only operate if they are robust enough. And that doesn’t applicable simply to the shackle, but also to every fastener, screw, anchor point, bolt head. A plastic anchor just won’t cut it.
In other words, there are different ground anchors types. But even the best type will be in vain if it’s easy to smash. The burglar would then simply need to lift your bike into a van and drive it away so that they may deal with the chain in peace.
The chain and disc lock (if you use one) also need to be heavy robust so that they aren’t simple to crop or whack. But the ground anchor is very vital since that’s what keeps your bike glued to YOUR location.
How do you fit an anchor for a motorcycle ground?
A masonry drill with 5/8-inch drill bits is always included in the fitting package. Bolts require holes to be drilled in the floor.
Now, the more solid the foundation, the better. Thieves can simply cut through a weak floor if it is constructed of wood or some other weak material.
In order to ensure that your anchor is as secure as possible, you should drill a 4-inch hole through concrete.
How strong are ground anchors?
The strength of ground anchors is sufficient to withstand hurricanes and hold up a whole building. They're also capable of securing a mighty vehicle.
Even if you use a high-quality hardened steel anchor, it may not work as effectively if it is not mounted to a concrete wall or floor.
The anchor is only part of the equation. In addition to the installation, the ground must be considered.
How do you remove an anchor from a motorcycle ground?
For good reason, getting rid of a ground anchor is a challenge. It would be a waste of time if it were too easy to remove!
The issue is that there isn't an elegant solution that doesn't cause damage to the floor. Remove the anchor by cutting away a square of concrete and refinishing the floor to its original condition.
Another option is to remove the bolts' heads with an angle grinder and then leave the rest of the bolts in place.
When you no longer require a ground anchor, some manufacturers are aware of how difficult it may be to remove them. As a result, drive-over-friendly domed anchors are manufactured. Buying one of these is probably a good idea, as it won't get in the way once you've stopped using it for your bike.
Can you fit a ground anchor in to Tarmac?
Tarmac can be used as a ground anchor if it is "concrete in" type installation. Many of the bolt-down ground anchors used in construction are not as secure in Tarmac as they are in concrete because of the supplied bolts. What matters is how thick your asphalt is, and what is underlying it. Using concrete or hard-standing under the Tarmac will make the bolts more secure. If your ground anchor is made entirely of Tarmac, you can discover the particular bolt you need by searching Google for "Tarmac ground anchor bolts."