Best Leather For Work Gloves : Review And Buying Guide

Even the most demanding duties can be handled with leather work gloves. Hands of employees are better shielded by leather from exposure to cold, heat, abrasion, and impact. Dexterity and breathability are also features. Leather is a great material for labor gloves because of these qualities.

Finding the best leather work glove can be a little difficult due to the wide range of leather options and work glove design characteristics. Choosing the right glove for the application can be aided by understanding the variations in leather kinds and glove features like cut pattern, thumb design, and cuff style. To make sure you have the greatest leather work glove for your task, go over the steps below.

---

Types of Leather

There are numerous leather options from which to chose when it comes to the sort of leather used to make work gloves.

As a truly natural product, leather can vary from hide to hide in thickness, look, durability, and color. Some provide a layer of protection that is thicker and more resilient, while others are more agile and constructed of much thinner hide.

The type of job the gloves will be performing is really the deciding factor when choosing the leather for them because various hides have different advantages.

To further comprehend their differences, let's examine the five most common forms of leather.

Cowhide

The most common type of leather used in work gloves is cowhide because it is so simple to care for. Because of its accessibility, toughness, good looks, and comfort, it provides excellent value. Additionally, it offers exceptional heat and abrasion resistance. This leather may be found on our TM2500 Tradesman glove.

Pigskin

Pigskin leather is a little bit denser and gives flexibility and toughness. Pigskin work gloves feel supple and velvety at the same time. Additionally, material breathes well and won't stiffen after drying after being wet.

Goatskin

Due to its flexibility and resilience to wear, goatskin leather is frequently regarded as one of the strongest leathers. Even though this leather is much thinner than cowhide and pigskin, it nevertheless offers exceptional resistance to tearing and is extremely smooth and supple thanks to the natural oils contained inside the hide.

Deerskin

One of the naturally softest and supplest leathers available is deerskin. When exposed to water, it dries soft and stays flexible, much like pigskin. Deerskin also regulates temperature better and prevents overheating because it is a lightweight leather. That's one of the key reasons our TM1500 Tradesman glove's palm is made of deerskin grain leather.

Sheepskin

One of the softest and coziest materials available is sheepskin leather. The smooth, supple grain and light weight give it its distinctive touch sensitivity and good dexterity, which are its key characteristics.

Other Leathers

Although these are the most popular types of leather for work gloves, additional leathers are also available that offer high-quality hand protection. These include buffalo leather and horsehide. Both are incredibly strong, abrasion resistant, and have very long lifespans.

Knowing everything there is to know about the many kinds of leather out there should help you decide which kind is ideal for your work glove requirements.

Consider a pair of grain leather gloves for the longest lifespan because you'll be receiving the finest value for your money. Split leather gloves are your best option if you just need work gloves sometimes or for short periods of time because they offer the necessary hand protection at a lower price.

Cut Pattern

A glove's dexterity and comfort are influenced by the way it is cut.

The entire back and all four fingers of a pair of gunn cut gloves are cut from a single piece of leather, creating a seamless back. To reduce bulk in those fingers and improve dexterity, the palm, little finger, and index finger are cut from one piece of leather, and the two middle fingers are cut from another piece. Better wear and comfort are provided by this cut.

 

Gloves with a clef cut give a stitch-free palm. On the front side, each finger is a distinct piece of leather, and the palm and all four fingers are carved from the same piece of leather. A roomier fit results from this.

Thumb Design

A leather glove's usability and comfort are significantly impacted by its thumb design.

A continuous whole leather thumb with a sewed seam all the way around is referred to as a straight thumb. Due of its affordable price, this design is the most popular.

The thumb of a glove with a wing thumb pattern is sewn out to the side. To increase strength and reduce stress on the palm, welts are added to the seams.

The set-in thumb of a keystone thumb style is positioned to offer optimal comfort, reinforced additional stitching, and increased dexterity. It is sewed in as a distinct component.

Added Safety & Performance Features

Cut Resistant Liners

These give the glove an additional layer of defense against cuts and punctures.

Impact Resistant features

On the rear of the glove, components like anti-impact thermoplastic or D3o® padding are placed strategically to offer great protection against crushing, pinching, and bumps. Choose high impact gloves that adhere to the most recent ANSI/ISEA impact requirements. gloves with PinchGuard Finger Caps are available!

Hi-Viz Colors

Gloves in fluorescent yellow or orange improve worker safety by increasing hand awareness. Safety coordinators can also make sure that employees are following safety rules with the use of hi-viz accents.

Winter Liners

These gloves, which come in a variety of materials and weights including ThinsulateTM, can shield the hands from a range of winter risks like cold, freezing rain, snow, sleet, and numb fingertips.

Oilbloc™

OilblocTM, a unique treatment made especially for Superior Glove® and included into the tanning process of their Endura® brand gloves, gives leather gloves amazing water and oil resistance capabilities for the duration of the glove.

FAQS

Why Wear Work Gloves?

You should guard your hands because you only have one set. We won't tell you what to do, but it's important to note that in 2015, the U.S. Bureau of Labor Statistics reported that 143,000 hand-related injuries were reported in the workplace; this statistic excludes any hand injuries that occurred at work but weren't reported as well as the work that people like you and I perform to keep our homes, cars, and backyards in good working order. In 2015, there were 143,000 recorded hand injuries, which placed them second to the reported 191,450 occurrences of back injuries received by Americans while working.

Everyone is aware that lifting with the knees will safeguard the back. The same respect should be extended to your hands.

What is a thumb welt?

A welt is a thin, roughly half-inch wide leather strip that is stitched at the seams to shield them from abrasion. The seam where the thumb and palm meet has a thumb welt.

What is Grade A leather?

Grade A leather often has fewer surface imperfections, is softer, and has little to no scarring on the hide. As the grade descends to B, C, and D, it is discovered to have more imperfections or surface blemishes and might occasionally be a little rougher.

Conclusion

Like all personal protective equipment, gloves will eventually need to be changed due to wear and tear, but picking the right glove for the job will assist ensure maximum longevity and reduce waste.

---